The PF22 professional foam lance has an adjustable air intake. The foam jet can be fine tuned to your requirements and can be adjusted from straight to wide with up to 6 metres (20 feet) of a dense foam jet. Suitable for Industrial, Craft and Domestic use. The 1/4" inlet thread is adaptable to most pressure washers.
Note: It is recommended to rinse the foam lance with clear water at the end of each working day to maintain the foam filter and thus ensure proper functionality of the foam lance.
Features
- Adjustable air intake
- Adjustable jet – straight to wide
Specifications
- Inlet: 1/4" BSP Female
- Nozzle: 1.25mm (Additional sizes available see Nozzle Flow Chart below)
- Detergent Tank: 1 litre
- Working Pressure: 2900 psi (200 bar)
- Bursting Pressure: 3200 psi (220 bar)
- Temperature Range: 60ºC
Nozzle Flow Chart
PF2220 is supplied with a 1.25mm nozzle, if you requirements fall out side the parameters listed below you will need to order the relevant nozzle for your application. Please note for optimal results your pressure washer system should be operating between GREEN flow rates.
Pressure | 1.1mm Nozzle 175004PW | 1.25mm Nozzle Supplied with PF2220 | 1.4mm Nozzle 175003PW | 1.5mm Nozzle 175002PW |
---|---|---|---|---|
1450 psi (100 bar) | 4.95 lpm | 6.0 lpm | 7.5 lpm | 9.45 lpm |
1740 psi (120 bar) | 5.4 lpm | 6.5 lpm | 8.15 lpm | 10.35 lpm |
2030 psi (140 bar) | 5.8 lpm | 7.05 lpm | 8.8 lpm | 11.1 lpm |
2320 psi (160 bar) | 6.2 lpm | 7.5 lpm | 9.35 lpm | 11.85 lpm |
2610 psi (180 bar) | 6.55 lpm | 7.95 lpm | 9.9 lpm | 12.5 lpm |
2900 psi (200 bar) | 6.9 lpm | 8.4 lpm | 10.45 lpm | 13.1 lpm |
3190 psi (220 bar) | 7.2 lpm | 8.8 lpm | 11.0 lpm | 13.8 lpm |