Tec7 Pur Cleaner is used to clean any standard tread expanding foam gun, attached to the gun, spray and your done.
Tec7 cleaner also removes uncureded expanding foams, is easy to use and is sutable for all tyrpes of exanding foam guns.
Easy to use
For every gun with standard thread
Suitable for all PU foams
Cleaning of a PU gun
Turn the dosing button of the gun completely shut, before screwing PUR Cleaner onto the gun.
Screw the can onto it up to the blocking position.
Then turn the dosing button completely open and press the lever of the gun completely in so as to remove the foam residues
from the gun.
Repeat like this until the cleaning agent comes out pure.
Once again turn the dosing button completely shut, after which you can screw the PUR Cleaner can from the gun.
Clean the ring thoroughly and remove any remaining product from the gun.
Always store the gun dry. • 2. Removing uncured PU foam
Install the provided spout on the can.
Check whether the surface to be treated is resistant to PUR Cleaner. In case of doubt, first do a test on a spot that is not
normally visible.